[j-nsp] bgp.l3vpn.2 and target VRF?

[Chris Spears]

Do you have a tunnel pic installed?


Dave Diller wrote:
> Normally, the system uses the vrf-target to import routes from  
> bgp.l3vpn.0 to the correct VRF.inet.0.  This is working fine for  
> unicast routes.  I'm trying to do the same now to get routes from  
> bgp.l3vpn.2 to VRF.inet.2
> 
> Routes are received correctly in bgp.l3vpn.2 from the peer, are  
> active, have the correct route-distinguisher, and the correct vrf- 
> target, but never make it into the destination table.
> 
> Am I missing something additional needed here?  It all "looks" ok to  
> me...
> 
> -dd
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp

-- 

%%%%%%%%%%%%%%%%%%%%%%%%%%%
Chris Spears, OSCnet
Senior Routing Engineer
phone: 614-292-9415
fax: 614-728-8110