[j-nsp] bgp.l3vpn.2 and target VRF?

[Dan Evans]

Try this:

http://www.juniper.net/techpubs/software/junos/junos85/swconfig85-multicast/id-13041423.html#id-13041423




On 5/20/08, Dave Diller <dave at maxgigapop.net> wrote:
>
> Normally, the system uses the vrf-target to import routes from
> bgp.l3vpn.0 to the correct VRF.inet.0.  This is working fine for
> unicast routes.  I'm trying to do the same now to get routes from
> bgp.l3vpn.2 to VRF.inet.2
>
> Routes are received correctly in bgp.l3vpn.2 from the peer, are
> active, have the correct route-distinguisher, and the correct vrf-
> target, but never make it into the destination table.
>
> Am I missing something additional needed here?  It all "looks" ok to
> me...
>
> -dd
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>