[j-nsp] J6350 rackmounts

[Miskell, Craig]

Hi,
        With an intense dislike for front mounted devices in my racks (hate how now matter how tight you do up the nuts, the devices still sag at the back), I'm looking for full rails or equivalent for my 6350's.  Googling has thrown up part numbers J6350-RMK and J6350-RMK-02, but the descriptions I've found so far aren't actually all that descriptive, and the juniper site itself hasn't given up any details on those parts.  Would someone who knows please enlighten me as to the difference?

Thanks,

Craig Miskell,
Technical Support,
AgResearch Invermay
03 489-9279
D,NA

=======================================================================
Attention: The information contained in this message and/or attachments
from AgResearch Limited is intended only for the persons or entities
to which it is addressed and may contain confidential and/or privileged
material. Any review, retransmission, dissemination or other use of, or
taking of any action in reliance upon, this information by persons or
entities other than the intended recipients is prohibited by AgResearch
Limited. If you have received this message in error, please notify the
sender immediately.
=======================================================================