[j-nsp] ERX 1400 cCOC 12 / OC3 line card issue

[Diogo Luiz Montagner]

Did you try slot erase 8 ?

And after this issue a reload in slot 8.

Sent from my iPod

On 06/06/2009, at 17:25, "Dr Rocco DiSanto" <drdisanto at directus.net>  
wrote:

>
> Hi All,
>
> I'm attempting to bring up an oOCx-STMx F0 line card (350-00098-00)  
> on a
> legacy ERX 1400.
> I am using a PIC OC3-4SM_I/O card (350-10065-02) OC3 with 4 SM ports.
> Can someone tell me if this is a valid hardware configuration?
> I receive a message at boot "ERROR Line Card in slot 8 autoboot  
> disabled"
> and the line card never boots.
>
> Any guidance would be much appreciated.
>
> Rocco
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp