[j-nsp] OSPF stuck in Exchange state!
Nilesh Khambal
nkhambal at juniper.net
Tue May 19 01:12:44 EDT 2009
Do you have a lot of lsa retransmissions on E1? Check for drops in Q3
or Q0 on E1. Try disabling any CoS config you might have on this E1
link.
Thanks,
Nilesh
--------------------------------------------------
Sent from my mobile handheld device
On May 18, 2009, at 9:32 PM, "Asad Ul-Islam" <asad747 at cyber.net.pk>
wrote:
> Dear friends!
>
>
>
> I have 2 Juniper Routers connected via E1 Interface and running OSPF
> on
> them. However OSPF is stuck in Exchange state. I have verified that
> MTU is
> same on both ends. Physical Media is absolutely fine and error free,
> yet its
> stuck in Exchange state. One of these router has connectivity to 3rd
> juniper router over similar E1 media and its working fine.
>
>
>
> I have tried enabling trace options but no meaningful errors, manually
> entered MTUs, changed Ips but nothing seems to work. Both routers
> can ping
> each other on same E1 Media but not forming neighbourship.
>
>
>
> Any ideas what could be wrong here?? And how can I further
> investigate the
> reason??
>
>
>
>
>
> Regards ,
>
>
>
> Asad
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
More information about the juniper-nsp
mailing list