[j-nsp] ethernet over PDH (E1)

Truman Boyes truman at suspicious.org
Thu Nov 5 23:12:49 EST 2009


The J-series can create L2VPNs  or  Layer 2 circuit over the PDH  
circuit. You need to run IP over the circuit. The J-series does not do  
circuit emulation; but it will carry Ethernet through MPLS. Keep in  
mind you will want to ensure that you shape on the e1 circuit and  
possibly rate-limit on ingress because otherwise you will see traffic  
loss during peaks and bursts.

Kind regards,
Truman Boyes


On 29/10/2009, at 11:20 AM, amin amin wrote:

> Actually the existing equipment using RAD modem that do to convert  
> from e1
> based to ethernet based. can the J series do like that?
>
> On Wed, Oct 28, 2009 at 9:37 PM, 陈江 <ilovebgp4 at gmail.com> wrote:
>
>> hi!
>>
>> VPLS, L2VPN or L2circuit could done this.
>>
>> On Wed, Oct 28, 2009 at 10:20 PM, amin amin <amiensda at gmail.com>  
>> wrote:
>>
>>> how can configure ethernet over E1 on Jseries without using IP  
>>> between
>>> Jseries1 and Jseries2? it means interface E1 on Jseries to be  
>>> bridging
>>> mode
>>>
>>>
>>> LAN-----Jseries1-----------PDH---------------Jseries2--------LAN
>>>
>>> Regards,
>>>
>>> ~Samin
>>> _______________________________________________
>>> juniper-nsp mailing list juniper-nsp at puck.nether.net
>>> https://puck.nether.net/mailman/listinfo/juniper-nsp
>>>
>>
>>
>>
>> --
>> BR!
>>
>>
>>
>>          James Chen
>>
>
>
>
> -- 
> -------------------------------------------
>   http://aministi.web.id/
> -------------------------------------------
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp



More information about the juniper-nsp mailing list