[j-nsp] PIM neighbors

[Vladislav Vasilev]

I have a M7i router that does not report its PIM neighbors - Redback
SE1200 and Cisco 7600. I can see the M7i on both the SE1200 and the
7600.

interface ae0.803 {
    mode sparse;
    version 2;
}

M7i
xxx at xxx-xxx# run show pim neighbors
Instance: PIM.master

[edit]

Redback
[xxx]r1p1#show ip pim ne
PIM Neighbor Table
Neighbor Address Interface          Uptime   DR Prio  GenID    DR SR
                                    Expire   hex      hex         Intvl
10.x.x.x       UPLINK             00:08:21 1        59ccdf7f
                                    00:01:23


Multicast traffic does flow though. Has anyone come across this? I am
running JUNOS 10.0R1.8.

Best Regards,
V. Vasilev