[j-nsp] congestioning a logical sub-interface

[Truman Boyes]

Scheduling on an interface with a shaping rate that is less than the physical line rate artificially creates congestion when an offered traffic load is greater than the shaping rate. ie. If you have a 5Mbps scheduler and you offer 5.01Mbps you will see queuing... 


On 22/02/2010, at 8:51 AM, meryem Z wrote:

> 
> Hello community,
> 
> i need to verify Cos scheduler on my logical interface. to do this i need to simulate Congestion conditions. 
> The question is : how to congestion a logical sub-interface without impacting the physical interface. is it possible to set a bandwidth limit for the sub-interface?
> 
> 
> thank you.
> 
> Regards.
> 
> 		 	   		  
> _________________________________________________________________
> Hotmail : une messagerie fiable avec la protection anti-spam performante de Microsoft
> https://signup.live.com/signup.aspx?id=60969
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>