[j-nsp] SRX3600: cluster problem

Fahad Khan fahad.khan at gmail.com
Wed Jun 9 09:41:46 EDT 2010


It looks like, first your primary device failed and then there was a
disconnect of your Control link

You should configure control-link recovery

set chassis cluster control-link-recovery

for re-enabling the disabled device automatically

regards,

Muhammad Fahad Khan
JNCIP - M/T # 834
IT Specialist
Global Technology Services, IBM
fahad at pk.ibm.com
+92-321-2370510
+92-301-8247638
Skype: fahad-ibm
http://www.linkedin.com/in/muhammadfahadkhan



On Fri, Jun 4, 2010 at 7:07 PM, eddaibouni bilal <eddaibouni at gmail.com>wrote:

> hello,
>
> i have problem with SRX 3600 clusters . in fact  i had configure SRX
> cluster
> in active passive configuration ,but the node 0 is down like shown  with
> show chassis cluster status command.
>
>
>
> admin at FW2> show chassis cluster status
> Cluster ID: 1
> Node                  Priority          Status    Preempt  Manual failover
>
> Redundancy group: 0 , Failover count: 3
>    node0                   200         disabled       no       no
>    node1                   100         primary        no       no
>
> Redundancy group: 1 , Failover count: 17
>    node0                   0           disabled       yes      no
>    node1                   100         primary        yes      no
>
> in fact we did suspect that it is an issue witch HA control link, we did
> relace it but the problem persists.
> and when i diplay the chassis alarms is what a have in node 0:
>
> node0:
> --------------------------------------------------------------------------
> 1 alarms currently active
> Alarm time               Class  Description
> 2010-06-04 09:26:02 UTC  Minor  Check FPC 0 Fabric Chip
>
>
>
> Chassis Cluster Configuration
> =====================
> set chassis cluster cluster-id 1 node 0 reboot
> set chassis cluster cluster-id 1 node 1 reboot
>
> �� Data Fabric Configuration
> =====================
> set interfaces fab0 fabric-options member-interfaces ge-0/0/7
> set interfaces fab1 fabric-options member-interfaces ge-13/0/7
>
>
> thanks ,
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>


More information about the juniper-nsp mailing list