[j-nsp] Ugh, another ISIS problem

[Tony Li]

> Thanks for the response.  Can you show me where it is treating this like a p2p link?  When I configure point-to-point on the Juniper, the adjacency just drops and doesn't come up at all.  Without 'point-to-point', the adjacency "comes up".  My biggest question is why it would suddenly work when configuring a simple traceoption.  I've been able to get it to work sporadically, but whatever I end up changing, when I wipe the config and re-do it, I can't replicate the working config, which leads me to believe it's some sort of bug.


Eric,

If you look, you'll see that the MRV is forming an adjacency directly with your Juniper, not with the pseudo-node.

Suggest you try changing to a /24 prefix and see if the MRV changes its behavior.

Tony