[j-nsp] ipv6 routing

chrisccnpspam2 at gmail.com chrisccnpspam2 at gmail.com
Wed Mar 31 15:13:14 EDT 2010


Forgive me for not fully remembering as its been a while since I muddled with v6.  But for some reason I believe you have to do the static route to a link local address, not to the address you configure under the interface. This would be the address starting with "fe80"

Can anyone validate my vague memory?

Sent via BlackBerry by AT&T

-----Original Message-----
From: Ramesh Karki <rameshkarki at gmail.com>
Date: Thu, 1 Apr 2010 00:43:20 
To: <juniper-nsp at puck.nether.net>
Subject: Re: [j-nsp] ipv6 routing

Hi,

yes, I can ping my neighbor or next-hop ip adddress, and also there is no
any hidden routes on table inet6.0.

> show route table inet6.0
inet6.0: 12 destinations, 14 routes (12 active, 0 holddown, 0 hidden)
+ = Active Route, - = Last Active, * = Both

abcd:3800::1/128   *[Direct/0] 1d 04:55:09
                    > via lo0.0
abcd:3800:1:1::/64 *[Direct/0] 1d 04:41:21
                    > via ge-0/0/0.0
abcd:3800:1:1::1/128
                   *[Local/0] 1d 04:41:21
                      Local via ge-0/0/0.0
abcd:3800:2:1::/126*[Direct/0] 13:48:59
                    > via fe-0/1/0.0
abcd:3800:2:1::1/128
                   *[Local/0] 13:48:59
                      Local via fe-0/1/0.0
abcd:3800:4::/48   *[Direct/0] 1d 04:47:20
                    > via fe-0/3/1.0
abcd:3800:4::1/128 *[Local/0] 1d 04:47:20
                      Local via fe-0/3/1.0
fe80::/64          *[Direct/0] 1d 04:47:20
                    > via fe-0/3/1.0
                    [Direct/0] 1d 04:41:21
                    > via ge-0/0/0.0
                    [Direct/0] 14:05:12
                    > via fe-0/1/0.0
fe80::217:cbff:fe77:0/128
                   *[Local/0] 1d 04:41:21
                      Local via ge-0/0/0.0
fe80::217:cbff:fe77:1f/128
                   *[Local/0] 14:05:12
                      Local via fe-0/1/0.0
fe80::217:cbff:fe77:5e/128
                   *[Local/0] 1d 04:47:20
                      Local via fe-0/3/1.0
fe80::2a0:a5ff:fe62:57c7/128
                   *[Direct/0] 1d 04:55:09
                    > via lo0.0

I have tried run ospf3 but no luck, the command > show ospf3 interface
ge-0/0/0.0 says
“OSPF instance is not running”



On Wed, Mar 31, 2010 at 8:38 PM, Mark Tinka <mtinka at globaltransit.net>wrote:

> On Wednesday 31 March 2010 04:06:55 pm Ramesh Karki wrote:
>
> > Hi,
> >
> > here is my config :
>
> Can we take a look at your v6 routing table (I'm guessing
> it's small enough).
>
> Cheers,
>
> Mark.
>
_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp



More information about the juniper-nsp mailing list