[j-nsp] Customer CPE question
William Jackson
wjackson at sapphire.gi
Wed Sep 8 07:10:22 EDT 2010
Hi
We are deploying an access network for L2 Ethernet services using a non
juniper manufacturer.
This is a product set specifically targeted at these MEF services and is
very good and cheap. But is only for L2 services.
We have other customers that will only require L3 services.
We have an internal discussion ongoing regarding whether we use the same
L2 access CPE or a L3 CPE.
So example:
Customer just wants L3 services with BGP
Option 1: use same L2 CPE equipment and backhaul to L3 aggregation and
have consolidated BGP edge there.
Option 2: use separate L3 CPE and dark fibre to same L3 aggregation
nodes, have BGP on CPE.
There are pro's/cons to each setup and I wanted to find out what other
service providers were doing when delivering their services.
Any comments:
More information about the juniper-nsp
mailing list