[j-nsp] traffic load balancing between Juniper and Cisco equipment

[Martin T]

Is it possible to load-balance traffic between a Juniper M10i and
Cisco 1812 using two different last-mile(ADSL2+) providers? Topology
should be like this:

http://img803.imageshack.us/img803/8766/loadb.png

Idea is to use both ADSL2+ links simultaneously in order to achieve
better speed. In case on of the link fails, the traffic should use the
available ADSL2+ path. Is such load-balancing doable using the Juniper
PE router and Cisco CPE? If yes, what are the optimal/easiest
technologies to achieve the goals I described?


regards,
martin