[j-nsp] traffic load balancing between Juniper and Cisco equipment

[Gabriel Blanchard]

mlppp

On 08/21/2011 08:11 PM, Martin T wrote:
> Is it possible to load-balance traffic between a Juniper M10i and
> Cisco 1812 using two different last-mile(ADSL2+) providers? Topology
> should be like this:
>
> http://img803.imageshack.us/img803/8766/loadb.png
>
> Idea is to use both ADSL2+ links simultaneously in order to achieve
> better speed. In case on of the link fails, the traffic should use the
> available ADSL2+ path. Is such load-balancing doable using the Juniper
> PE router and Cisco CPE? If yes, what are the optimal/easiest
> technologies to achieve the goals I described?
>
>
> regards,
> martin
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp