[j-nsp] LT interfaces at MX80

sthaug at nethelp.no sthaug at nethelp.no
Wed Dec 28 08:52:45 EST 2011


> > On the 1G MICs there is extra capacity to handle an lt interface, so
> > you can configure under chassis, assuming a 20x1G MIC in MIC slot 0:
> >
> > fpc 1 {
> >    pic 1 {
> >        tunnel-services {
> >            bandwidth 1g;
> >        }
> >    }
> > }
> >
> 
> I understood that as MIC has enough capacity so I can also use all 20x1G
> ports on MIC simultaneously with tunneling ?

Yes.

> Can I also use all 1G ports on the MIC if I will change bandwidth to 10g ?

No. If you need 10G lt capacity you'll also need a 10G MIC, *and* for 
the 10G lt interface one of the physical 10G ports will no longer be
usable.

Steinar Haug, Nethelp consulting, sthaug at nethelp.no



More information about the juniper-nsp mailing list