[j-nsp] RE-333 upgrade

[Max Pierson]

Thanks for the responses everyone. Think I got all the info I need.

Max

On Tue, Feb 15, 2011 at 1:45 AM, Jonas Frey (Probe Networks) <
jf at probe-networks.de> wrote:

> Hi,
>
> RE-333 max is 768 MB. Yes it will be enough for a v4+v6 feed.
> You should also consider upgrading your SBC memory. See
> http://juniper.cluepon.net for unofficial upgrades.
> Latest JunOS that will work is 9.2 due to non FPC-E.
> You also need 1G CF for that within your RE-333 to work.
>
> There once was a RE-600 for the M40 which is part number RE-M40-600-2048
> but these are very hard to find.
>
> Regards,
> Jonas
>
> Am Montag, den 14.02.2011, 15:47 -0600 schrieb Max Pierson:
> > Hi List,
> >
> >
> > I have an old M40 (non-E) that I would like to upgrade as much as
> possible.
> > I have RE-333's currently. Question is how much memory can this guy hold
> and
> > will that be enough to take a full v4 + v6 table?? Also, what is the last
> > version of Junos that can run on this kit after I max out the memory and
> CF
> > on it?? And lastly, is the RE-333 the best that can go in this chassis??
> >
> > Looked on cluepon, but didn't find the answers, so sorry if this has been
> > hashed 1000 times already. Might as well make it 1001 :)
> >
> > TIA,
> > M
> > _______________________________________________
> > juniper-nsp mailing list juniper-nsp at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/juniper-nsp
>