[j-nsp] Configure BGP on SSG 550M

[Rafael Rodriguez]

Hi David,

You probably want to look into:
http://www.juniper.net/techpubs/software/screenos/screenos6.3.0/630_ce_all.pdf

Should be in Routing -> Border Gateway Protocol.

BTW, this covers BGP on screenos based devices and not junos devices.

On Tue, Feb 1, 2011 at 3:22 AM, David Lubowa <david.lubowa at gmail.com> wrote:

> Hi Guys,
>
> I am pretty virgin when it comes to Juniper but i switched because i think
> its amazing gear , i am trying to configure BGP on my SSG550M using a
> private ASN( just for now ) to my upstream but i am not sure where to start
> i have looked for some documentation online but i am still not yet
> convinced
> on which is the right documentation because the information is all
> scattered.
>
> If someone could please point me in the right direction i would be happy ,
> FYI i setup BGP on cisco gear a couple of years ago and i understand the
> basic facts of BGP but i am not sure exactly how to set it up on Juniper.
>
> Your help is highly appreciated.
>
> cheers
>
>
> --
>
>
>
>
>
> "I will not say i failed 1000 Times, I will say that i discovered there are
> 1000 ways that can cause failure. ---- Thomas Edison"
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>