[j-nsp] Output for "show bgp summary" is showing different on twoREs

[Stefan Fouant]

Yeah, I would suggest restarting the backup RE and see if it comes into the
proper state as well...

Stefan Fouant
JNCIE-M #513, JNCIE-ER #70, JNCI
http://www.shortestpathfirst.net
GPG Key ID: 0xB4C956EC


> -----Original Message-----
> From: juniper-nsp-bounces at puck.nether.net [mailto:juniper-nsp-
> bounces at puck.nether.net] On Behalf Of saurabh sood
> Sent: Saturday, June 25, 2011 12:28 PM
> To: Alex
> Cc: juniper-nsp at puck.nether.net
> Subject: Re: [j-nsp] Output for "show bgp summary" is showing different
> on twoREs
> 
> It will help me to narrowdown this issue.
> 
> Thanks
> 
> On Sat, Jun 25, 2011 at 9:23 PM, Alex <alex.arseniev at gmail.com> wrote:
> 
> > If the BGP peer in the master Routing Engine has negotiated address-
> family
> > capabilities that are not supported for nonstop active routing, then
> the
> > corresponding BGP neighbor state on the backup Routing Engine shows
> as idle.
> > On switchover, the BGP session is reestablished from the new master
> Routing
> > Engine.
> > http://www.juniper.net/**techpubs/en_US/junos11.1/**
> > topics/reference/requirements/**nsr-system-requirements.html#**nsr-
> bgp<http://www.juniper.net/techpubs/en_US/junos11.1/topics/reference/re
> quirements/nsr-system-requirements.html#nsr-bgp>
> > Note, for instance, inet-vpn multicast AFI is not supported for NSR.
> > HTH
> > Rgds
> > Alex
> >
> >
> > ----- Original Message ----- From: "saurabh sood"
> <saurabh24u at gmail.com>
> > To: <juniper-nsp at puck.nether.net>
> > Sent: Saturday, June 25, 2011 2:40 PM
> > Subject: [j-nsp] Output for "show bgp summary" is showing different
> on
> > twoREs
> >
> >
> >  Hello,
> >>
> >> I have observed a different scenario, i don't know wthr it is by
> expected
> >> or
> >> not.
> >>
> >> Router has two REs and GRES, NSR is enabled also commit synchronize
> is
> >> there.
> >> But while checking the output for "show bgp summary" then on Master
> RE
> >> everything is showing ok.
> >>
> >> On the other hand backup RE is showing all bgp states IDLE.
> >>
> >> Is it an expected behavior?
> >>
> >> Regards,
> >>
> >> Sunny
> >> ______________________________**_________________
> >> juniper-nsp mailing list juniper-nsp at puck.nether.net
> >> https://puck.nether.net/**mailman/listinfo/juniper-
> nsp<https://puck.nether.net/mailman/listinfo/juniper-nsp>
> >>
> >>
> >
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp