[j-nsp] several vlans under one vpls routing instance

Dusan Avbreht d.avbreht at gmail.com
Wed May 4 08:37:17 EDT 2011


Hello,
It shouldn't be problem! Can you provide interface configuration and "show
vpls connectins " statistics.

I can give you one snippet where it works
"
HSI-VPLS-250 {
        instance-type vpls;
        vlan-id 250;
        interface xe-1/1/0.250;
        interface xe-1/1/1.250;
        interface ge-1/2/8.250;
        interface ge-1/3/0.250;
        interface xe-2/1/0.250;
        no-local-switching;
        route-distinguisher 10.0.0.1:250;
        vrf-import VRF_IMPORT_HSI;
        vrf-export VRF_EXPORT_HSI;
        inactive: vrf-target target:6500:250;
        protocols {
            vpls {
                traceoptions {
                    file HSI-log;
                    flag connections;
                }
                mac-table-size {
                    3200;
                }
                no-tunnel-services;
                site S12-TB03 {
                    site-identifier 52500;
                    multi-homing;
                    site-preference primary;
                    interface xe-1/1/0.250 {
                        interface-mac-limit {
                            1600;
                        }
                    }
                }
                site S12-DSLAM {
                    site-identifier 52501;
                    multi-homing;
                    site-preference primary;
                    interface ge-1/3/0.250;
                }
                site S12-GPON {
                    site-identifier 52502;
                    multi-homing;
                    site-preference primary;
                    interface xe-1/1/1.250;
                }
                site Perm.Connection {
                    site-identifier 100;
                    interface ge-1/2/8.250;
                }
                site S12-GPON-E {
                    site-identifier 5203;
                    multi-homing;
                    site-preference primary;
                    interface xe-2/1/0.250;
                }
            }
        }
"


On Tue, May 3, 2011 at 5:35 PM, meryem Z <meryem_z at hotmail.com> wrote:

>
> hello,
>
> I'm trying to configure serveral sub-interfaces under the same vpls routing
> instance on junos 9.6 m7i router and 10.3 on M120. but still doesn't work.
> with one sub-interface it works fine.
> I found some juniper docs on this subject but it was related to mx-series..
>
> my config is as follows:
>
> router> show configuration routing-instances Test_VPLS
> instance-type vpls;
> interface xe-5/0/0.100;
> interface xe-5/0/0.101;
> route-distinguisher 64512:100;
> vrf-target target:64512:100;
> protocols {
>    vpls {
>        site-range 5;
>        site Site1 {
>            site-identifier 1;
>            interface xe-5/0/0.100;
>             interface xe-5/0/0.101;
>        }
>    }
> }
> what should i add to make it work?
>
> Thank a lot.
>
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>



-- 
________________________________
Dušan Avbreht
Professional Service Consultant

AVDUS d.o.o.

Mobile: +386 41 340546
E: d.avbreht at gmail.com
E: dusan at avdus.net


More information about the juniper-nsp mailing list