[j-nsp] 1GE CWDM/DWDM Optics???

[Jonas Frey (Probe Networks)]

Hello,

i can confirm that several CWDM SFP's from different vendors work fine
with the MX-series. They will show up as unknown vendor as its been said
already....unless you reprogramm these to return juniper part numbers
(if you've got a SFP eeprom programmer).

-
Jonas

Am Freitag, den 09.09.2011, 14:30 +1000 schrieb Ben Dale:
> I just dropped some MRV CWDM optics (SFP-GDCWZX-xx-R) into an MX80 and they work fine.
> 
> They show up as unknown vendor: 
> 
> comlinx at bras1-bne# run show chassis hardware 
> ....
>       Xcvr 0     0        NON-JNPR     1JJ680083602548   SFP-SX
>       Xcvr 9              NON-JNPR     A28T000100        SFP-LH
>       Xcvr 0     0        NON-JNPR     1JJ680083602518   SFP-SX
>       Xcvr 9              NON-JNPR     A28T000101        SFP-LH
> 
> But you can see more detail in the pic information:
> 
> comlinx at bras1-bne# run show chassis pic pic-slot 1 fpc-slot 1    
> ....
> PIC port information:
>                           Fiber                    Xcvr vendor
>   Port  Cable type        type  Xcvr vendor        part number       Wavelength
>   0     GIGE 1000SX       MM    FIBERXON INC.      FTM-8012C-SLG     850 nm  
>   9     GIGE 1000LH       SM    MRV COMM, INC.     SFP-GDCWZX-51     1511 nm 
> 
> 
> The MX also picks up the digital diagnostics fine with:
> 
> comlinx at bras1-bne# run show interfaces diagnostics optics ge-1/0/9  
> Physical interface: ge-1/0/9
>     Laser bias current                        :  5.230 mA
>     Laser output power                        :  1.0920 mW / 0.38 dBm
>     Module temperature                        :  26 degrees C / 78 degrees F
>     Module voltage                            :  2.2910 V
>     Receiver signal average optical power     :  0.1801 mW / -7.44 dBm
>     Laser bias current high alarm             :  Off
>     Laser bias current low alarm              :  Off
>     Laser bias current high warning           :  Off
>     Laser bias current low warning            :  Off
>     Laser output power high alarm             :  Off
>     Laser output power low alarm              :  Off
>     Laser output power high warning           :  Off
>     Laser output power low warning            :  Off
>     Module temperature high alarm             :  Off
>     Module temperature low alarm              :  Off
>     Module temperature high warning           :  Off
>     Module temperature low warning            :  Off
>     Module voltage high alarm                 :  Off
>     Module voltage low alarm                  :  Off
>     Module voltage high warning               :  Off
>     Module voltage low warning                :  Off
>     Laser rx power high alarm                 :  Off
>     Laser rx power low alarm                  :  Off
>     Laser rx power high warning               :  Off
>     Laser rx power low warning                :  On
>     Laser bias current high alarm threshold   :  110.000 mA
>     Laser bias current low alarm threshold    :  4.248 mA
>     Laser bias current high warning threshold :  100.000 mA
>     Laser bias current low warning threshold  :  4.500 mA
>     Laser output power high alarm threshold   :  5.0110 mW / 7.00 dBm
>     Laser output power low alarm threshold    :  0.6310 mW / -2.00 dBm
>     Laser output power high warning threshold :  3.9800 mW / 6.00 dBm
>     Laser output power low warning threshold  :  0.7940 mW / -1.00 dBm
>     Module temperature high alarm threshold   :  83 degrees C / 181 degrees F
>     Module temperature low alarm threshold    :  -13 degrees C / 9 degrees F
>     Module temperature high warning threshold :  78 degrees C / 172 degrees F
>     Module temperature low warning threshold  :  -8 degrees C / 18 degrees F
>     Module voltage high alarm threshold       :  3.800 V
>     Module voltage low alarm threshold        :  2.800 V
>     Module voltage high warning threshold     :  3.500 V
>     Module voltage low warning threshold      :  3.100 V
>     Laser rx power high alarm threshold       :  3403.8995 mW / 35.32 dBm
>     Laser rx power low alarm threshold        :  3735.2205 mW / 35.72 dBm
>     Laser rx power high warning threshold     :  3751.1625 mW / 35.74 dBm
>     Laser rx power low warning threshold      :  413.2390 mW / 26.16 dBm
> 
> 
> 
> Cheers,
> 
> Ben
> 
> On 09/09/2011, at 1:19 PM, Juno Guy wrote:
> 
> > Anyone know of any 1GE (not 10GE) CWDM/DWDM optics that work with MX
> > series?
> > 
> > thx
> > 
> > -Juno
> > _______________________________________________
> > juniper-nsp mailing list juniper-nsp at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/juniper-nsp
> > 
> 
> 
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 198 bytes
Desc: This is a digitally signed message part
URL: <https://puck.nether.net/pipermail/juniper-nsp/attachments/20110909/ae08fe27/attachment-0001.pgp>