[j-nsp] out of band management - real OOB

[Herro91]

Hi,

Don't know if this will work, but have you tried executing the "file copy"
command from within the logical system by "set cli logical-system blah" ?

if this works, i don't know if you can install software from that location
or not unfortunately.

On Sat, Sep 17, 2011 at 8:14 AM, Chris Evans <chrisccnpspam2 at gmail.com>wrote:

> Juniper devices have out of band ethernet ports, but have the HUGE HUGE
> downfall of being in the main routing table conflicting with every other
> route. This limits it usage, however a work around is to put the FXP
> interface into a logical system (on support devices). This has downfalls
> too, but its better than nothing. Unfortunately Juniper hasn't gotten this
> clue yes, every other vendor I've used recently has full vrf/logical system
> support for their OOB interfaces keeping them out of the main routing
> table.
>
> One main downfall I'm running into is that I cannot copy or install
> software
> using the FXP port as my source for traffic. Does anyone know of a command
> that will allow me to select the logical system? The current commands don't
> seem to allow routing instances or logical systems to be specified.
>
> Something like: file copy logical-system:MGMT:ftp://blah/blah..
>
> Anyone have any other workarounds.  Thanks!
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>