[j-nsp] Pulse Client Mobile Devices with SRX ?

[Joel jaeggli]

On 9/27/11 18:58 , Jonathan Lassoff wrote:
> On Tue, Sep 27, 2011 at 6:20 AM, Chris Gapske <cgapske at paducahpower.com> wrote:
>> Sorry Very new at this but I would like to ask for help on an issue.
>>
>> I am getting conflicting stories on the ability of the SRX.  TAC says they cannot get Mobile  Devices such as Android or Idevices to connect with the pulse client.
>> However I have heard reports of people getting there Android devices to work can anybody confirm this ?
>>
>> Thank you .. I am pretty new at the SRX thank you.
> 
> Apparently it is possible to do on some SRX platforms. I've only had
> success in terminating mobile clients against the "Secure Access"
> (SA-series) devices running IVE/SSL VPN software.
> 
> I found this KB article on doing it. It utilizes the "Dynamic VPN"
> feature. http://kb.juniper.net/InfoCenter/index?page=content&id=KB17641
> 
> Beware the Android client though -- as of several months ago, it only
> provided a wrapped web browser, rather than real IP tunneling. The iOS
> Pulse client does proper tunneling though.

2.1 which has been around for a while does support ip tunneling but only
on devices where the end user has root access, which either means you
have developer phones or they've been hacked.

> Good luck.
> 
> Cheers,
> jof
> 
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>