[j-nsp] dynamic flow control process (High Memory)
Ala' Amira
aamira at bluezonejordan.com
Thu Apr 26 06:22:00 EDT 2012
Dear Salbeeso,
Just try to upgrade the software .
-----Original Message-----
From: juniper-nsp-bounces at puck.nether.net
[mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of Mohammad Salbad
Sent: Sunday, April 22, 2012 2:01 PM
To: juniper-nsp at puck.nether.net
Subject: [j-nsp] dynamic flow control process (High Memory)
Hi All
We have an M10i router running 10.2R3.10 (512M RAM) ((uptime two years))
with high memory utilization as follow:
show chassis routing-engine à Memory utilization 95 percent
show system processes extensive à 1317 root 1 96 0 372M 363M
select 39:09 0.00% dfcd
it has been noted that the dynamic flow control process (dfcd) is taking
372M of the memory.
Another thing we've checked another router which was rebooted recently and
it was OK,,, memory utilization 45% and dfcd allocation is only 30M
Any ideas !!!!
Thank you in advance
M. Salbad
_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
More information about the juniper-nsp
mailing list