[j-nsp] SRX & MPLS

[Chris Kawchuk]

Err VPLS Implies Layer 2 only. 

Where is the VRP runninng in-between? Are you doing "vlan-id" inside the VPLS instance for normalization, then binding an irb.x into it? I dont think that works in SRX/J either. (l3 within VPLS).

- CK.

On 2012-08-23, at 6:39 PM, Johan Borch wrote:

> "VPLS multihoming, which allows connecting a CE device to multiple PE
> routers to provide redundant connectivity, is not supported on J Series or
> SRX Series devices"
> 
> I'm going to have two SRX's on each site and using vrrp between them, will
> I hit this exception then?