[j-nsp] SRX & MPLS

[Johan Borch]

Your'e right of course :)

My question was more how the VPLS multihoming will affect this setup.

Regards
Johan

On Thu, Aug 23, 2012 at 11:21 AM, Chris Kawchuk <juniperdude at gmail.com>wrote:

> Err VPLS Implies Layer 2 only.
>
> Where is the VRP runninng in-between? Are you doing "vlan-id" inside the
> VPLS instance for normalization, then binding an irb.x into it? I dont
> think that works in SRX/J either. (l3 within VPLS).
>
> - CK.
>
> On 2012-08-23, at 6:39 PM, Johan Borch wrote:
>
> > "VPLS multihoming, which allows connecting a CE device to multiple PE
> > routers to provide redundant connectivity, is not supported on J Series
> or
> > SRX Series devices"
> >
> > I'm going to have two SRX's on each site and using vrrp between them,
> will
> > I hit this exception then?
>
>