[j-nsp] MX960 AC power strip

joel jaeggli joelja at bogus.com
Thu Aug 23 11:08:24 EDT 2012

On 8/23/12 6:59 AM, JA wrote:
> Hi
> I need advice if someone is having an MX960 up on AC power.
> Usually high capacity (32A) power bars (PDU) come with C13 or C19 outlets
> while Juniper has no provision for such power cords.
we use c19-c20 cables. we have a standard supplier for those so I don't 
believe we're using a juniper p/n

the device (well the whole rack) is fed off two PDUs with a 30a 3 phase 
service for each
>   If European power
> cords are ordered with MX960, the CEE7/7 plug can be connected to Schuko
> outlets. But there is no Schuko PDU that supports more than 16A. One can
> easily exceed 16A if two power supplies are connected on same PDU.
> Can anyone recommend some alternative or if anyone faced similar situation?
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp

More information about the juniper-nsp mailing list