[j-nsp] NG-MVPN flow prob

Stacy W. Smith stacy at acm.org
Tue Feb 21 00:42:48 EST 2012

I can't find documentation to back up my memory, but I vaguely remember that J-series wasn't officially supported when RSVP TE P2MP PMSI support was added to 8.5. I would begin by trying a more recent JUNOS release on the J6350.


On Feb 20, 2012, at 10:23 PM, Ahsan Khan wrote:

> Yes, you are right.
> BR/Ahsan
> On Tue, Feb 21, 2012 at 10:01 AM, Mark Tinka <mtinka at globaltransit.net>wrote:
>> On Monday, February 13, 2012 07:54:24 PM Ahsan Khan wrote:
>>> Problem occurs when CE1 (Connected with J6350) source
>>> starts sending multicast traffic but CE2 (Connected with
>>> M7i) receiver doesnot receive it
>> So if I understand you correctly, when the M7i is the Sender
>> PE router (and the J6350 is the Receiver PE router), all is
>> fine.
>> But when the J6350 is the Sender PE router (and the M7i is
>> now the Receiver PE router), things don't work even though
>> the control plane (and data plane signaling, i.e., p2mp
>> RSVP-TE) looks good.
>> Is that about right?
>> Mark.
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp

More information about the juniper-nsp mailing list