[j-nsp] NG-MVPN flow prob
ahsan.khan.sn at gmail.com
Tue Feb 21 01:04:34 EST 2012
Thank you Mark/Stacy. i will try this with the recent release.
Will share results soon.
On Tue, Feb 21, 2012 at 10:42 AM, Stacy W. Smith <stacy at acm.org> wrote:
> I can't find documentation to back up my memory, but I vaguely remember
> that J-series wasn't officially supported when RSVP TE P2MP PMSI support
> was added to 8.5. I would begin by trying a more recent JUNOS release on
> the J6350.
> On Feb 20, 2012, at 10:23 PM, Ahsan Khan wrote:
> > Yes, you are right.
> > BR/Ahsan
> > On Tue, Feb 21, 2012 at 10:01 AM, Mark Tinka <mtinka at globaltransit.net
> >> On Monday, February 13, 2012 07:54:24 PM Ahsan Khan wrote:
> >>> Problem occurs when CE1 (Connected with J6350) source
> >>> starts sending multicast traffic but CE2 (Connected with
> >>> M7i) receiver doesnot receive it
> >> So if I understand you correctly, when the M7i is the Sender
> >> PE router (and the J6350 is the Receiver PE router), all is
> >> fine.
> >> But when the J6350 is the Sender PE router (and the M7i is
> >> now the Receiver PE router), things don't work even though
> >> the control plane (and data plane signaling, i.e., p2mp
> >> RSVP-TE) looks good.
> >> Is that about right?
> >> Mark.
> > _______________________________________________
> > juniper-nsp mailing list juniper-nsp at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/juniper-nsp
More information about the juniper-nsp