[j-nsp] Problem Routing process doesn't work on SRX cluster
Scott T. Cameron
routehero at gmail.com
Tue Jun 19 08:26:06 EDT 2012
rpd is disabled on the backup node in a chassis cluster.
You can set some routes through fpx0 using the groups node0/node1, but it
has to be truly OOB.
Scott
On Tue, Jun 19, 2012 at 8:21 AM, Roland Droual
<roland.droual at paris.iufm.fr>wrote:
> Hello the list,
>
>
> I solve most of problems to ping from my SRX cluster.
> But now, I have a new problem, because I did a lot of changes:
> I don't have routing process on the cluster of site B.
>
> ================================
> toto at BA-SRX650-01# show chassis cluster
> reth-count 6;
> redundancy-group 0 {
> node 0 priority 100;
> node 1 priority 1;
> }
> redundancy-group 1 {
> node 0 priority 100;
> node 1 priority 1;
> interface-monitor {
> ge-6/0/19 weight 255;
> ge-6/0/20 weight 255;
> ge-6/0/21 weight 255;
> ge-6/0/22 weight 255;
> ge-6/0/23 weight 255;
> ge-15/0/19 weight 255;
> ge-15/0/20 weight 255;
> ge-15/0/21 weight 255;
> ge-15/0/22 weight 255;
> ge-15/0/23 weight 255;
> ge-6/0/18 weight 255;
> ge-15/0/18 weight 255;
> }
> }
>
> ========================================
> toto at BA-SRX650-01# run show chassis cluster status
> Cluster ID: 1
> Node Priority Status Preempt Manual failover
>
> Redundancy group: 0 , Failover count: 0
> node0 100 secondary no no
> node1 1 primary no no
>
> Redundancy group: 1 , Failover count: 0
> node0 0 secondary no no
> node1 0 primary no no
> ============================
> toto at BA-SRX650-01> show route all
> error: the routing subsystem is not running
>
> ============================
> toto at BA-SRX650-01> restart routing
> error: Routing protocols process is not running
> error: Routing protocols process was not restarted
>
> =====================================
> artere at BA-SRX650-01# run show chassis alarms
> node0:
> --------------------------------------------------------------------------
> 1 alarms currently active
> Alarm time Class Description
> 2012-06-19 19:51:11 UTC Major PEM 0 Output Failure
>
> node1:
> --------------------------------------------------------------------------
> 1 alarms currently active
> Alarm time Class Description
> 2012-06-19 20:07:36 UTC Major PEM 0 Output Failure
>
> I don't know where I can find the solution. How can I solve the problem
> about routing process doesn't work ?
>
> Thanks
>
> Roland
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>
More information about the juniper-nsp
mailing list