[j-nsp] IPFIX - "no template found" in wireshark of Flow Collector

[Tima Maryin]

Hi,

Try Analyze -> Decode as  then cflow


On 23.03.2012 22:25, Arun Kumar wrote:
> Hi NSP,
>
> I configured IPFIX in juniper MX running 11.2 R3. I run wireshark in flow
> collector where i m getting flows from the juniper router but all data are
> showing "no template found"? What is the problem in this? I had a problem
> on the same router where i was told to move to another PIC/port. I ve done
> the same but now getting this error? What could be the cause of this? Is
> the router not supporting the flow or not sending the flow in proper format?
>
> thanks in advance
> Arun