[j-nsp] Update on 10.4R9 stability for MX?

[Serge Vautour]

We've started to implement 10.4R9 in Prod. A few MX960s with MPC & DPC mix and MX80s have been upgraded without a problem (knock on wood!). We use L2VPN & VPLS with OSPF/LDP/BGP.


Serge



________________________________
 From: Clarke Morledge <chmorl at wm.edu>
To: juniper-nsp at puck.nether.net 
Sent: Wednesday, May 9, 2012 4:13:26 PM
Subject: [j-nsp] Update on 10.4R9 stability for MX?
 
It has been a couple of months since the JTAC recommended Junos software versions has been updated for the MX.   As of February, the recommendation was to use 10.4R8.5 for the MX, except that there is an issue related to BFD configurations on the DPC line cards.   Supposedly, the fix is in 10.4R9.

In looking at the release notes, there are some issues that have been resolved in the 11.x series but nothing noted yet for any future 10.4.x releases.   Perhaps there are future 10.4.x versions planned to carry forward these fixes?

I am curious to know about anyone's experience with 10.4R9 over the past few months.  I have DPC only currently; i.e. no MPC hardware -- and no MultiServices.

Thanks.



Clarke Morledge
College of William and Mary
Information Technology - Network Engineering
Jones Hall (Room 18)
Williamsburg VA 23187
_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp