[j-nsp] EX4200 Virtual chassis

Giuliano Medalha giuliano at wztech.com.br
Tue Nov 13 11:39:55 EST 2012


You can use the following too:

set virtual-chassis preprovisioned
set virtual-chassis no-split-detection
set virtual-chassis member 0 role routing-engine
set virtual-chassis member 0 serial-number [SERIAL-1]
set virtual-chassis member 1 role routing-engine
set virtual-chassis member 1 serial-number [SERIAL-2]


set chassis redundancy graceful-switchover
set ethernet-switching-options nonstop-bridging
set routing-options nonstop-routing
set system commit synchronize




On Tue, Nov 13, 2012 at 1:26 PM, Rachid DHOU <rachid.dhou at gmail.com> wrote:

> Hi Experts,
>
> If i have a single EX4200 switch and i want to add a new EX4200 switch to
> it using Virtual chassis capability.
>
> i want to let the old switch as a master and the new one as backup.
> i will keep new switch OFF.
>
> on the old switch :
>
> set member 0 mastership-priority 255
> set member 1 mastership-priority 255
>
> reload new switch.
>
> shall i need to reboot also the old switch ?
> did i forget something to create the Virtual Chassis ?
>
>
> *Kind regards,*
> *Rachid DHOU*
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>


More information about the juniper-nsp mailing list