[j-nsp] Divert one specific VRF (L3 MPLS VPN) or L2 circuit over RSVP-TE

[Arun Kumar]

Hi,

I am testing RSVP-TE in Juniper MX Junos 11.2R3. Is there a way to have a
RSVP-TE between ingress and egress PE and use that RSVP-TE only for one
specific L3 MPLS VPN or L2 Circuit VPN customer and other VPN customers
between the same ingress and egress PE to prefer a IGP/LDP path?

In case of Cisco, for L3 MPLS VPN the same can be done by changing the bgp
next hop to a new loopback and have a static for the new loopback over the
TE (without using "autoroute announce" option). But in Juniper, once
RSVP-TE is configure the tunnel destination usually loopback 0 (bgp next
hop for all L3 VPN customers) starts learned via inet.3 routing table. So
as soon as RSVP-TE comes up the loopback 0 of egress PE is learned via
RSVP-TE. I want to stop this and have only the new loopback (bgp next hop
for only one L3 VPN/L2 VPN) take RSVP-TE?

Thanks in advance.

Arun