[j-nsp] WAN input prioritization on MX

[Ivan Ivanov]

Hi,

In that case you try Tricolor marking policer to mark the excessive traffic
and drop it on output. It is not exactly the same but could help.

http://www.juniper.net/techpubs/en_US/junos10.4/information-products/pathway-pages/cos/tricolor-marking-policers.html

HTH,
Ivan,

On Wed, Oct 17, 2012 at 12:23 AM, Gustavo Santos <gustkiller at gmail.com>wrote:

> Krasimir,
>
> Just finished the  reading the class of service section from Juniper MX
> Series: A Comprehensive Guide to Trio Technologies , and you are righ. What
> I´m trying to do is an ingress queuing and the book talks that it´s still
> unsuported on 11.4 and I checked the changelogs and on 12.2 is still
> unsuported.
>
>
> gustavo at BRD01# commit check
> [edit class-of-service interfaces ge-1/1/4 unit 0]
>   'input-shaping-rate'
>     cannot configure bandwidth (pic has no CoS queuing)
> error: configuration check-out failed
>
>
> Gustavo Santos
> Analista de Redes
> CCNA , MTCNA , MTCRE, MTCINE, JUNCIA-ER
>
>
>
> 2012/10/16 Krasimir Avramski <krasi at smartcom.bg>
>
> >
> >
> > On Mon, Oct 15, 2012 at 4:40 PM, Gustavo Santos <gustkiller at gmail.com
> >wrote:
> >
> >>
> >> For instance: If the current wan ingress traffic total is 450mbits and
> >> high
> >> priority traffic is 100mbits, and low priority is 350mbits = no packet
> >> discard, but if traffic towards high priority subnet is 300mbits and low
> >> priority is 300mbits, then the queuing / scheduler will drop the low
> >> priority traffic until the sources traffic gets shaped to 200mbits for
> the
> >> low priority and the high priority gets 300mbits.
> >>
> >> On Linux it's quite simple to achieve.
> >>
> >>
> > AFAIK this is only possible with ingress queuing (EQ2, DPC-EQ hardware,
> > ingress CoS not enabled by default)  and simple filters:
> >
> >
> http://www.juniper.net/techpubs/en_US/junos10.4/topics/usage-guidelines/cos-configuring-ingress-hierarchical-cos-on-enhanced-queuing-dpcs.html
> >
> >
> http://www.juniper.net/techpubs/en_US/junos10.4/topics/concept/mf-classifiers-simple-filters-overview-cos-config-guide.html
> >
> >
> http://www.juniper.net/techpubs/en_US/junos10.4/topics/example/mf-classifiers-example-simple-filters-cos-config-guide.html
> >
> > Unfortunately MPCs are still not supported....
> >
> > Best Regards,
> > Krasi
> >
> >
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>



-- 
Best Regards!

Ivan Ivanov