[j-nsp] How reliable is EX multichassis? 3300 and 8200 switches

[Morgan McLean]

Have no split detection, I'll try for the GRES and NSR.

Thanks,
Morgan

On Tue, Oct 30, 2012 at 4:24 PM, Doug Hanks <dhanks at juniper.net> wrote:

> Should be hitless. You need to configure GRES + NSR + no-split-detection.
>
>
> On 10/30/12 4:06 PM, "Morgan McLean" <wrx230 at gmail.com> wrote:
>
> >Can anybody give me an idea regarding typical failover times if the master
> >in a two switch pair were to die? The quickest I've seen in my testing
> >with
> >EX3300's is 45 seconds, just for L2 forwarding to continue working, no
> >routing. All the ports drop link as well on the secondary switch while
> >things switch over. I can have my laptop connected to the secondary
> >switch,
> >passing traffic up an uplink on the secondary, and if the master dies it
> >creates a 45 second interruption.
> >
> >Normal?
> >
> >Morgan
> >
> >On Sun, Oct 28, 2012 at 2:24 PM, Giuliano Medalha
> ><giuliano at wztech.com.br>wrote:
> >
> >> Robert,
> >>
> >> It was released by juniper one or two weeks ago I think.
> >>
> >> Take a look:
> >>
> >>
> >>
> https://www.juniper.net/us/en/products-services/routing/mx-series/mx2000/
> >>
> >> MX2010
> >> MX2020
> >>
> >>
> >>
> >>
> https://www.juniper.net/us/en/products-services/routing/mx-series/mx2000/
> >>#specifications
> >>
> >> But I really don't know if it will support virtual chassis without JCS.
> >>
> >> Att,
> >>
> >> Giuliano
> >>
> >>
> >>
> >> On Sun, Oct 28, 2012 at 3:47 PM, Robert Hass <robhass at gmail.com> wrote:
> >>
> >>> On Fri, Oct 26, 2012 at 11:44 PM, Giuliano Medalha
> >>> <giuliano at wztech.com.br> wrote:
> >>> > Considering the MX family (240, 480 and 960 with TRIO 3D) and the new
> >>> MX-L
> >>>
> >>> Hi
> >>> What is new MX-L - can you write a little mort ? MX80 successor ?
> >>>
> >>> Rob
> >>>
> >>
> >>
> >_______________________________________________
> >juniper-nsp mailing list juniper-nsp at puck.nether.net
> >https://puck.nether.net/mailman/listinfo/juniper-nsp
> >
>
>
>