[j-nsp] Fwd: bgp license mx480 MPC-3D-16XGE-SFPP

[John pp]

i have been told its an honor system however
someone i know bought the license and it was just a piece of paper saying
they could use it


On Thu, Apr 25, 2013 at 10:04 PM, OBrien, Will <ObrienH at missouri.edu> wrote:

> My apologies, I didn't pay attention to the blade you referenced.
>
> That blade is only good for switching unless you have the appropriate
> license to enable layer 3 protocols.
> Here's the document the clarifies what you can do with that card.
>
>
> http://www.juniper.net/techpubs/en_US/junos10.3/topics/task/configuration/chassis-mx-series-ip-ethernet-mode-configuring.html
>
> On Apr 25, 2013, at 5:39 PM, "OBrien, Will" <ObrienH at missouri.edu>
>  wrote:
>
> > No license needed. Just configure under protocols.
> >
> > Will O'Brien
> >
> > On Apr 25, 2013, at 5:17 PM, "John pp" <luklaupdates at gmail.com> wrote:
> >
> >> hi all
> >>
> >> i have a new MX480 with MPC-3D-16XGE-SFPP and I am trying to enable BGP
> but
> >> am not sure how?
> >> someone said I need a license is this true?
> >> you can email me: luklaupdates(AT, AT, FOR
> >> SPAM)gmail.com<luklaupdates at gmail.com>
> >>
> >> thanks
> >> _______________________________________________
> >> juniper-nsp mailing list juniper-nsp at puck.nether.net
> >> https://puck.nether.net/mailman/listinfo/juniper-nsp
> >
> > _______________________________________________
> > juniper-nsp mailing list juniper-nsp at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/juniper-nsp
>
>