[j-nsp] M7i CFEB-E question

[Gaurav Taparia]

I was looking for the output of "show chassis pic fpc-slot 1 pic-slot 2"

Thank you,
 - Gaurav


On Fri, Sep 13, 2013 at 1:59 PM, <sthaug at nethelp.no> wrote:

> > I need to find out how much memory is available on the integrated AS-PIC
> on
> > a FEB-M7i-SVCS-ASM-E-BB (M7i Enhanced Forwarding Engine Board with
> built-in
> > Adaptive Services Module).
> >
> > I haven't manged to get an answer through our usual Juniper channels.
> > Hoping that I can get the information here.
>
> *Which* memory are you looking for? The CFEB with built-in ASM has
> several types of memory.
>
> We have a few boxes with the built-in ASM (but we don't really use
> the services functionality). All our boxes have either been upgraded
> to 256 MB or they came with 256 MB. They typically report
>
> x at y> show chassis cfeb
> CFEB status:
>   State                                 Online
>   Intake temperature                 23 degrees C / 73 degrees F
>   Exhaust temperature                29 degrees C / 84 degrees F
>   CPU utilization                     7 percent
>   Interrupt utilization               0 percent
>   Heap utilization                   16 percent
>   Buffer utilization                 27 percent
>   Total CPU DRAM                    256 MB
>   Internet Processor II                 Version 2, Foundry IBM, Part
> number 164
>   Start time:                           2011-10-31 02:19:10 CET
>   Uptime:                               683 days, 6 hours, 55 minutes, 24
> seconds
>
> x at y> show chassis hardware
> Hardware inventory:
> Item             Version  Part number  Serial number     Description
> ...
> FPC 1                                                    E-FPC
>   PIC 2          REV 05   750-015931   PN9779            ASP - Integrated
> (Layer-2-3)
>
> Steinar Haug, Nethelp consulting, sthaug at nethelp.no
>