[j-nsp] ipv6-tunneling

[Johan Borch]

Hi!

I'm trying to tunnel ipv6 over mpls ipv4 core using the ipv6-tunneling
knob, following this document:
http://www.juniper.net/techpubs/en_US/junos13.1/topics/example/mpls-tunneling-ipv6-over-mpls-ipv4.html

I'm not finding that document that helpfull and can't get it to work.
family ipv6 is enabled on all interfaces and ipv6-tunneling on protocol
mpls. But in this case the customer is directly connected to the PE and
have a vrf/l3vpn there, do I still need the whole inet6 ebgp stuff?

Regards
Johan