[j-nsp] ipv6-tunneling

[Diogo Montagner]

Hi Johan,

Are trying to do 6PE or 6VPE ?

Would be helpfull if you share the relevant configuration you have applied
on your routers.

If you are trying to 6VPE, you will need the family inet6-vpn too on the
MP-iBGP.

Thanks

On Friday, 4 April 2014, Johan Borch
<johan.borch at gmail.com<javascript:_e(%7B%7D,'cvml','johan.borch at gmail.com');>>
wrote:

> Hi!
>
> I'm trying to tunnel ipv6 over mpls ipv4 core using the ipv6-tunneling
> knob, following this document:
>
> http://www.juniper.net/techpubs/en_US/junos13.1/topics/example/mpls-tunneling-ipv6-over-mpls-ipv4.html
>
> I'm not finding that document that helpfull and can't get it to work.
> family ipv6 is enabled on all interfaces and ipv6-tunneling on protocol
> mpls. But in this case the customer is directly connected to the PE and
> have a vrf/l3vpn there, do I still need the whole inet6 ebgp stuff?
>
> Regards
> Johan
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>


-- 
./diogo -montagner
JNCIE-SP 0x41A