[j-nsp] ipv6-tunneling

[Johan Borch]

Hi!

I'm trying 6PE, I don't have that much useful config to show yet :(

Johan


On Thu, Apr 3, 2014 at 11:25 PM, Diogo Montagner
<diogo.montagner at gmail.com>wrote:

> Hi Johan,
>
> Are trying to do 6PE or 6VPE ?
>
> Would be helpfull if you share the relevant configuration you have applied
> on your routers.
>
> If you are trying to 6VPE, you will need the family inet6-vpn too on the
> MP-iBGP.
>
> Thanks
>
>
> On Friday, 4 April 2014, Johan Borch <johan.borch at gmail.com> wrote:
>
>> Hi!
>>
>> I'm trying to tunnel ipv6 over mpls ipv4 core using the ipv6-tunneling
>> knob, following this document:
>>
>> http://www.juniper.net/techpubs/en_US/junos13.1/topics/example/mpls-tunneling-ipv6-over-mpls-ipv4.html
>>
>> I'm not finding that document that helpfull and can't get it to work.
>> family ipv6 is enabled on all interfaces and ipv6-tunneling on protocol
>> mpls. But in this case the customer is directly connected to the PE and
>> have a vrf/l3vpn there, do I still need the whole inet6 ebgp stuff?
>>
>> Regards
>> Johan
>> _______________________________________________
>> juniper-nsp mailing list juniper-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/juniper-nsp
>>
>
>
> --
> ./diogo -montagner
> JNCIE-SP 0x41A
>