[j-nsp] Resetting link-state and PoE on EX3300

[Paul S.]

On 1/6/2014 午後 09:53, Phil Mayers wrote:
> All,
>
> We're trialing the EX3300 as an edge switch and there are a couple of 
> things we do on our current devices that I can't find an easy way to 
> do without making a (relatively slow) config change, commit, undo, 
> commit cycle - namely, blipping the ethernet link and the PoE.
>
> The former we use to encourage devices to get a new DHCP lease, and 
> the latter to fix hung/crashed wireless APs and VoIP phones.
>
> I can't see any way to do these without disabling the port or PoE via 
> a config change, which seems awkward - our existing kit has 
> operational-mode "reset/clear" commands for both. Any suggestions?
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp

As far as I know, the sanest way in Junos to do both of those is 
configuring them, and then using a commit confirmed 1 to commit it.

This way, it commits and auto removes your disable a minute later -- 
saving you the hassle of doing it yourself.

I'm not aware of any operational mode commands for either.