[j-nsp] Procedure for upgrade routing engines.

[Jonas Frey (Probe Networks)]

RE-S-1800 is running JunOS 64, so this will *not* work.

Mixing routing engines isnt recommended/supported officially by juniper
either, but works to some degree (RE1300/RE2000 32bit).



Am Mittwoch, den 08.01.2014, 19:43 +0800 schrieb Xuhu:
> OS version will be the same or not, official document didn't mention must be same hardware, but so must be the same.
> 
> Br,
> 
> On 8 Jan, 2014, at 5:16 pm, Misak Khachatryan <m.khachatryan at gnc.am> wrote:
> 
> Hello,
> 
> Does anybody know the right procedure to upgrade routing engines on working router?
> 
> We have MX480 with two RE-S-1300, now ordered two RE-S-1800. Is it possible to replace them while router working, i. e. replace one engine, sync config, perform switchover, replace second engine?
> 
> AS REs are very different I doubt it's possible, but better to ask.
> 
> 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 198 bytes
Desc: This is a digitally signed message part
URL: <https://puck.nether.net/pipermail/juniper-nsp/attachments/20140108/a15e94d3/attachment.sig>