[j-nsp] Could you pls clarify a bit about OAM for link fault management?

[Victor Sudakov]

Ben Dale wrote:
> 
> Something like this should do the trick once you've configured it on both ends:
> 
> set protocols oam ethernet link-fault-management action-profile UDLD event link-adjacency-loss
> set protocols oam ethernet link-fault-management action-profile UDLD action syslog
> set protocols oam ethernet link-fault-management action-profile UDLD action link-down
> set protocols oam ethernet link-fault-management interface ge-0/0/23.0 apply-action-profile UDLD
> 
> We had a similar issue to solve at some sites connected via Free-Space Optics units.

Ben, thanks a lot, it works. The interface goes down as expected.


-- 
Victor Sudakov,  VAS4-RIPE, VAS47-RIPN
sip:sudakov at sibptus.tomsk.ru