[j-nsp] Could you pls clarify a bit about OAM for link fault management?

[Victor Sudakov]

Ben Dale wrote:
> 
> Something like this should do the trick once you've configured it on both ends:
> 
> set protocols oam ethernet link-fault-management action-profile UDLD event link-adjacency-loss

I have come to the conclusion that 

"set protocols mstp interface ge-0/0/22.0 bpdu-timeout-action block"

might do the trick as well if configured on all interfaces connected to
the MUXes.

-- 
Victor Sudakov,  VAS4-RIPE, VAS47-RIPN
sip:sudakov at sibptus.tomsk.ru