[j-nsp] Question about inline flow sampling on MX 480 / Treo based interfaces

[Eric Van Tol]

> -----Original Message-----
> From: juniper-nsp [mailto:juniper-nsp-bounces at puck.nether.net] On Behalf
> Of Scott Granados
> Sent: Wednesday, June 11, 2014 11:13 AM
> To: juniper-nsp at puck.nether.net
> Subject: [j-nsp] Question about inline flow sampling on MX 480 / Treo
> based interfaces
> 
> What's the story on this and are there any
> pointers to methods of determining the best most granular rate possible?
> Any help would be most appreciated.
> 

It's my understanding that the sample rate has no effect when inline sampling is being done.  It can be configured, but sampling is performed on a 1:1 ratio no matter what.  Someone please correct me if I'm wrong.

-evt