[j-nsp] SRX Layer 2 Bridge

[Michael Gehrmann]

Hi Levi,

Your interface can be vlan tagged or ethernet-switching modes not both. The bridge family is for transparent mode only.

I would either terminate the vlan on this interface tagged or convert it to ethernet-switching and setup L3 vlan interfaces for all vlans. Without your design/reasons for doing this I can't comment more.

Cheers

Michael Gehrmann
Hosting Support Specialist - Networks 
Macquarie Telecom 


-----Original Message-----
From: juniper-nsp [mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of Levi Pederson
Sent: Saturday, 22 November 2014 3:59 AM
To: juniper-nsp at puck.nether.net
Subject: [j-nsp] SRX Layer 2 Bridge

All,

I'm in a bit of a quandry.  I need to land a vlan on a Tagged interface and then have it processed by the l3 vlan interface.

I currently have 5 different tags landing on that interface and would like to add another.

Has anyone accomplished this.  All the internet has given me is the use of the "family bridge" and that is being rejected as there is an "inet"
statement (on another Logical interface) in existence.

Thank you,

*Levi Pederson*
Mankato Networks LLC
cell | 612.481.0769
work | 612.787.7392
levipederson at mankatonetworks.net
_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp