[j-nsp] Process swi3: ipopt ip6opt on the MX80

[Yury Vladarchyk]

Hi to all!
I have question
Is responsible for what this process?

 PID USERNAME  THR PRI NICE   SIZE    RES STATE    TIME   WCPU COMMAND
   38 root        1 -36 -155     0K    16K WAIT   279:04 31.25% swi3: ipopt
ip6opt

Without specific reasons for increased load average and cpu, will clarify
at what increased only inerrupt value

 run show chassis routing-engine
Routing Engine status:
    Temperature                 45 degrees C / 113 degrees F
    CPU temperature             57 degrees C / 134 degrees F
    DRAM                      2048 MB (2048 MB installed)
    Memory utilization          91 percent
    CPU utilization:
      User                       9 percent
      Background                 0 percent
      Kernel                     9 percent
   *   Interrupt                 55 percent*
      Idle                      28 percent
    Model                          RE-MX80-T
        Start time                     2014-08-21 21:36:17 EEST
    Uptime                         19 days, 12 hours, 5 minutes, 7 seconds
    Last reboot reason             Router rebooted after a normal shutdown.
    Load averages:                 1 minute   5 minute  15 minute
                                       3.37       3.90       3.52

Best Regards,
Yury Vladarchyk,
Network Engineer,
ITBiz

Phone: +38 (044) 597 10 90
Mobile: +38 (050) 301 16 13
Skype: yury.vladarchyk