[j-nsp] Comments display (annote command) via show command !!

[Dovid Bender]

Of course for looking at configs. We use display set when we backup and diff the config files for any changes. I wish comments would be in display set as we'll...

Regards,

Dovid

-----Original Message-----
From: Chris Kawchuk <juniperdude at gmail.com>
Date: Thu, 19 Feb 2015 16:31:30 
To: juniper-nsp at puck.nether.net<juniper-nsp at puck.nether.net>
Cc: Asad Raza<asadgardezi at gmail.com>; juniper-nsp<juniper-nsp-bounces at puck.nether.net>; Harri Makela<harri_makela at yahoo.com>; <dovid at telecurve.com>
Subject: Re: [j-nsp] Comments display (annote command) via show command !!

I highly suggest always using the normal "show configuration" commands, as you'd also miss things like this in your lo0.0 filter:

term block-ntp {
    from {
        protocol udp;
        ##                              
        ## Warning: statement ignored: unsupported platform (ex4550-32f)
        ##
        port ntp;
    }
    then {
        discard;
    }
}

^^ and my guys wondered why local DNS requests and SNMP polls didn't work for a week.......

- Ck.


On 19/02/2015, at 12:12 AM, Dovid Bender <dovid at telecurve.com> wrote:

> Afaik it never shows in display set because comments aren't entered with set.
> 
> Regards,
> 
> Dovid
> 
> -----Original Message-----
> From: Asad Raza <asadgardezi at gmail.com>
> Sender: "juniper-nsp" <juniper-nsp-bounces at puck.nether.net>Date: Wed, 18 Feb 2015 10:23:54 
> To: Harri Makela<harri_makela at yahoo.com>
> Cc: <juniper-nsp at puck.nether.net>
> Subject: Re: [j-nsp] Comments display (annote command) via show command !!
> 
> Hi,
> 
> Show configuration in operational mode (without display set) displays the
> comments.