[j-nsp] L2Circuit with BGP/LDP

Mark Tinka mark.tinka at seacom.mu
Thu Feb 19 06:53:43 EST 2015

On 19/Feb/15 11:51, Adam Vitkovsky wrote:
> Hi Scott,
> There are two ways how you can setup the E-lines using BGP. 
> BGP Auto Discovery with LDP signalling. 
> BGP Auto Discovery with BGP signalling. 
> I think the second one is what you want to accomplish. 

I might have misunderstood the OP's question, but wasn't he asking about
how he can provision Martini EoMPLS circuits where FEC's are generated
from iBGP routes?


More information about the juniper-nsp mailing list