[j-nsp] MPLS Endpoint Discussion
Antonio Sanchez-Monge
amonge at juniper.net
Thu Jul 2 10:28:14 EDT 2015
loopbacks
On 7/2/15, 4:25 PM, "juniper-nsp on behalf of Levi Pederson"
<juniper-nsp-bounces at puck.nether.net on behalf of
levipederson at mankatonetworks.net> wrote:
>All,
>
>I've created simpler MPLS ring between a total of 6 MPLS 4550s. My
>questions what IP do I use for the Label Switched Path Endpoints. I can't
>seem to find a "best practice."
>
>Specifically this code
>
>Obfuscated as I'm a little to literal with my descriptions
>
>set protocols mpls label-switched-path PE2-to-PE1 to 10.254.1.1
>set protocols mpls label-switched-path PE2-to-PE3 to 10.254.1.6
>set protocols mpls label-switched-path PE2-to-PE4 to 10.254.0.4
>
>
>Do I use the /30 that exists between the Legs?
>
>Or should I use the LoopBack0 ?
>
>My thought would be Leg itself as it creates the path. But some documents
>state LoopBack.
>
>
>Thank you,
>
>*Levi Pederson*
>Mankato Networks LLC
>cell | 612.481.0769
>work | 612.787.7392
>levipederson at mankatonetworks.net
>_______________________________________________
>juniper-nsp mailing list juniper-nsp at puck.nether.net
>https://puck.nether.net/mailman/listinfo/juniper-nsp
More information about the juniper-nsp
mailing list